Combustion deposit remover for heat exchangers

Cleaner for removing the deposits of combustion residues on heat exchangers in aluminium alloys, copper, steel, stainless steel etc.

Mayline CaltecPlus eliminates the typical deposits on heat exchanger, on gas powered condensing boilers. The cleaner Mayline CaltecPlus was developed with a specific composition in order to achieve efficient cleaning, to restore afresh the heating transfer on heat exchangers.
CaltecPlus leaves a protective surface film on the heat exchanger for more easily removing new deposits in a future cleaning.


Code | Package: 5/MYCALP | 5 l canister

MY/SPRL | spray bottle 500ml (without contents) with lance 20 cm for application of Mayline CaltecPlus
Important note: WARNING! DO NOT spray on the hot heating exchanger, wait until it is just lukewarm! Strictly follow our instructions for use in order to avoid technical operator’s risks. Do NOT spray upon other components or electrical cables. Application only on heat exchangers in gas powered condensing boilers. After contact other components with the product, clean immediately with the tap water. Protect the product from frost.
Instructions for use: Remove the cover of the condensing boilers. Remove the coarsest combustion residues with a brush. Insert the lance of the sprayer bottle (optional, code MY/LSPCALP) in the heat exchanger and spray Mayline CaltecPlus evenly and amply, to impregnate the combustion deposits well with the cleaner. Then await for 10-15 minutes, hereafter rinse the heat exchanger well with the tap water. Repeat the operation in the case of heavily encrusted heat exchangers. After the treatment with Mayline CaltecPlus always rinse abundatly with the tap water.
Safety informations: In the event of eye contact, rinse eyes thoroughly with much water and consult a doctor. In the event of skin contact, rinse well with water. Wear gloves and protective eyewear. Use water to immediately remove the product from objects such as tiles, flooring, wash basins, etc. Keep out of reach of children!
Mixing proportions: Refer to the infomation data sheet
Mixing proportions: DO NOT dilute. The product comes ready for use.
Transport: The product is not hazardous for transport. The indicationsare provided based on actual experience. Technical changes are possible.
Disposal: For information concerning waste disposal/effluent, please consult the corresponding information data sheet.
Shelf life: Shelf life 5 years (from date of manufacture)

Mayline CALTECPLUS - Technical datasheet