Description
Code | Package: 5/MYHR | 5 l canister
1/MYHR | 1 l (pack of 12 bottles)
2/MYHR | 1 l (pack of 2 bottles)
1/MYHR | 1 l (pack of 12 bottles)
2/MYHR | 1 l (pack of 2 bottles)
Important note: Do not exceed the flow temperature of 50° C. The heating system must be free from any additional substance and fi lled with the clean water. Mayline HR cannot be mixed with other chemicals. Follow the instructions for use carefully to avoid damage to pumps and valves. AFTER THE CLEANING PROCESS, EMPTY THE HEATING SYSTEM AND RINSE WELL THE SYSTEM THOROUGHLY WITH THE CLEAN WATER. After the cleaning procedure, insert a protector for water treatment.
Protect the product from frost!
Instructions for use: Before performing the cleaning operations, drain and rinse the sludge from the system and replace it with the clean water. Add Mayline HR with a concentration of 0,5% for low dirty circuits, and 1% for sludgy circuits and turn on the pumps to obtain an optimal mixing. The application time varies from 2 to 4 days with a flow temperature that must not exceed 50° C, or at room temperature if cleaning is not carried out during a heating season. Make sure that all radiator valves are open and that there are not present blocked valves to ensure an optimal circulation of the heating cleaner.
AT THE END OF THE CLEANING OPERATION, EMPTY THE HEATING SYSTEM AND RINSE WELL THE SYSTEM THOROUGHLY WITH THE CLEAN WATER.
For protecting the cleaned system insert a correct water treatment for the type of system such as Mayline K32, Mayline Protec etc. and install a combined dirt separator preferably with a magnet of at least 10.000 Gauss.
Safety informations: In the event of eye contact, rinse eyes thoroughly with much water and consult a doctor. In the event of skin contact, rinse well with water. Wear gloves and protective eyewear. Use water to immediately remove the product from objects such as tiles, flooring, wash basins, etc. Keep out of reach of children!
Mixing proportions: Refer to the material safety data sheet (MSDS)
Mixing proportions: 0,5% of Mayline HR for low dirty circuits (0,5 litres or every 100 litres of water),
1% of Mayline HR for normal or heavily sludgy circuits (1 litre for every 100 litres of water).
ATTENTION! THE PRODUCT MUST NOT BE OVER OR UNDER DOSED.
Transport: The product is not hazardous for transport. The indications are provided based on actual experience. Technical changes are possible.
Disposal: The product must be disposed of in accordance with the current legal standards.
Shelf life: Shelf life 3 years (from date of manufacture)
