Description
Code | Package: 5/MYSB | 5 l canister
1/MYSB | 1 l (pack of 12 bottles)
2/MYSB | 1 l (pack of 2 bottles)
1/MYSB | 1 l (pack of 12 bottles)
2/MYSB | 1 l (pack of 2 bottles)
Important note: Do not exceed the flow temperature of 40° C. The heating system must be free from any additional substance and fi lled in with the clean water. Mayline SB can be mixed with Mayline HR, HRplus or Mayline CP if in the same circuit there are the radiators. AFTER THE CLEANING PROCESS, EMPTY THE HEATING SYSTEM AND RINSE WELL THE SYSTEM THOROUGHLY WITH THE CLEAN WATER. After the cleaning procedure, insert a protector for water treatment.
Protect the product from frost!
Instructions for use: Before performing the cleaning operations, drain and rinse the sludge from the system and replace it with the clean water. Make sure that all flow valves are open and that there are not present blocked valves, otherwise they have to be replaced.
Cleaning with boiler pump:
Add Mayline SB with a concentration 1% and turn on the pumps to obtain an optimal mixing, ensure that the flow temperature do not exceed 40° C. For an optimal cleaning, close all the valves and leave open only the furthest circuit and clean it in circulation for minimum 2 hours, then close it and proceed with the next one in the same manner. After cleaning every single circuit, open all valves and let it in circulation on the whole heating circuit for 1 hours.
Cleaning with external flushing pump:
use the same concentration and manner to clean with the external flushing pump, but use an application time of 2 and a half hours for every single circuit, and of 1 and a half hours for the whole heating circuit .
For very sludgy systems or systems with large water volumes extend the application time! After the cleaning process, empty the heating system and rinse well the system with the clean water. For protecting the cleaned system insert a correct water treatment for radiant heating systems such as Mayline SBA.
Cleaning with boiler pump:
Add Mayline SB with a concentration 1% and turn on the pumps to obtain an optimal mixing, ensure that the flow temperature do not exceed 40° C. For an optimal cleaning, close all the valves and leave open only the furthest circuit and clean it in circulation for minimum 2 hours, then close it and proceed with the next one in the same manner. After cleaning every single circuit, open all valves and let it in circulation on the whole heating circuit for 1 hours.
Cleaning with external flushing pump:
use the same concentration and manner to clean with the external flushing pump, but use an application time of 2 and a half hours for every single circuit, and of 1 and a half hours for the whole heating circuit .
For very sludgy systems or systems with large water volumes extend the application time! After the cleaning process, empty the heating system and rinse well the system with the clean water. For protecting the cleaned system insert a correct water treatment for radiant heating systems such as Mayline SBA.
Safety informations: In the event of eye contact, rinse eyes thoroughly with much water and consult a doctor. In the event of skin contact, rinse well with water. Wear gloves and protective eyewear. Use water to immediately remove the product from objects such as tiles, flooring, wash basins, etc. Keep out of reach of children!
Mixing proportions: Refer to the material safety data sheet (MSDS)
Mixing proportions: 1% (1 litre of Mayline SB for every 100 itres of water).
ATTENTION! THE PRODUCT MUST NOT BE OVER OR UNDER DOSED.
Transport: The product is not hazardous for transport. The indications are provided based on actual experience. Technical changes are possible.
Disposal: For information concerning waste disposal/effluent, please consult the corresponding safety data sheet.
Shelf life: Shelf life 5 years (from date of manufacture)
