Concentrated acid for heat exchangers

Highly concentrated acid against lime scale, sludge and rust deposits in heat exchangers

Mayline Puliboiler is a highly concentrated acid which eliminates all types of deposits from heating components and heat exchangers. Mayline Puliboiler is designed for using as chemical acid cleaner in all heating systems components and can be employed in conjunction with all commonly used materials, such as steel, copper, brass and galvanised materials, excluding aluminium and its alloys.


Code | Package: 5/MYPULI | 5 l canister
Important note: The system’s temperature must not exceed 45 °C if it is fi lled in with Mayline Puliboiler. Mayline Puliboiler cannot be mixed with other chemicals. Follow our instructions scrupulously in order to avoid damage of the components. Not suitable for components in aluminium and its alloys. After the acid cleaning process has been completed, the product must be removed from the system and the acid treated components must be neutralized with Mayline Neutro and then rinse thoroughly with the clean water. For waste disposal respect the laws in force in your country. Protect the product from frost.
Instructions for use: Mayline Puliboiler is a slightly foaming acid with a pH value of less than 1, to be diluted with water in proportions from 10 to 20%. The reaction increases by increasing the temperature - but never exceeding 45° C. Fill the acid solution dilute it as needed from 10 to 20% into the encrusted component using a proper flushing pump for acid cleanings. Start up the flushing pump and keep it in circulation for at least 30 minutes. It is important to check the pH value, the pH value must always be lower than 2 for guarantee the cleaning effi ciency. If the value is more than 2, the colour changes in azure. This colour change indicate to replace the solution. Always pay attention of the pH value or the colour change. After chemical cleaning, the product must be discharged from the system, properly neutralized with Mayline Neutro, always ensure to reach a neutral pH value. The acid treated system must be neutralized with Mayline Neutro for 20 minutes and then thoroughly rinsed with the mains water. For waste disposal respect the laws in force in your country.
Safety informations: In the event of eye contact, rinse eyes thoroughly with much water and consult a doctor. In the event of skin contact, rinse well with water. Wear gloves and protective eyewear. Use water to immediately remove the product from objects such as tiles, flooring, wash basins, etc. Keep out of reach of children!
Mixing proportions: Refer to the material safety data sheet (MSDS)
Mixing proportions: 10 - 20% (10 - 20 litres of Mayline Puliboiler for every 100 litres of water). ATTENTION: THE PRODUCT MUST NOT BE OVER OR UNDER DOSED.
Transport: Shipping in limited quantities (LQ). The indications are provided based on actual experience. Technical changes are possible.
Disposal: For information concerning waste disposal/effluent, please consult the corresponding safety data sheet.
Shelf life: Shelf life 5 years (from date of manufacture)

Technical Datasheet