Description
Code | Package: 5/MYNTO | 5 l canister
1/MYNTO | 1 l (pack of 12 bottles)
1/MYNTO | 1 l (pack of 12 bottles)
Important note: Use only with the dilution described. Mayline NEUTRO cannot be mixed with other chemicals.
After neutralization, always rinse with the clean water as well. Protect the product from frost.
Instructions for use: Mayline Neutro is used after chemical cleaning based on descaler, acids or bases. Usually the cleaning acids act with a pH value of 1 (highly acidic), descaler with a pH value of 3 (slightly acidic), solar thermal cleaner with a pH value of 8-9 (slightly bases), so after clean-ing it must be ensured that there are no residues or traces of these cleaners in the system.
Neutralization of heating components with highly concentrated acids:
Empty the system and remove all the acid used for cleaning. Insert Mayline Neutro to 5% mixed with water and let it circulate inside for about 20 minutes. Drain the system, rinse it with the water for about 3-5 minutes and check the pH value that must be about 7.
Neutralization of heating components with descaler:
Empty the system and remove the descaler solution. Insert Mayline Neutro to 5% mixed with the water and let it circulate inside for about 10 minutes. Drain the system and rinse with the water for about 3-5 minutes and check the pH value that must be about 7.
Neutralization of heating components with solar cleaner:
Empty the system and remove the cleaner solution. Insert Mayline Neutro to 5% mixed with th water and let it circulate inside for about 20 minutes. Drain the system and rinse with the water for about 3-5 minutes and check the pH value that must be about 7.
Neutralization of heating components with highly concentrated acids:
Empty the system and remove all the acid used for cleaning. Insert Mayline Neutro to 5% mixed with water and let it circulate inside for about 20 minutes. Drain the system, rinse it with the water for about 3-5 minutes and check the pH value that must be about 7.
Neutralization of heating components with descaler:
Empty the system and remove the descaler solution. Insert Mayline Neutro to 5% mixed with the water and let it circulate inside for about 10 minutes. Drain the system and rinse with the water for about 3-5 minutes and check the pH value that must be about 7.
Neutralization of heating components with solar cleaner:
Empty the system and remove the cleaner solution. Insert Mayline Neutro to 5% mixed with th water and let it circulate inside for about 20 minutes. Drain the system and rinse with the water for about 3-5 minutes and check the pH value that must be about 7.
Safety informations: In the event of eye contact, rinse eyes thoroughly with much water and consult a doctor. In the event of skin contact, rinse well with water. Wear gloves and protective eyewear. Use water to immediately remove the product from objects such as tiles, flooring, wash basins, etc. Keep out of reach of children!
Mixing proportions: Refer to the material safety data sheet (MSDS)
Mixing proportions: 5% (5 litres of Mayline Neutral for every 100 litres of water).
ATTENTION! THE PRODUCT MUST NOT BE OVER OR UNDER DOSED.
Transport: The product is not hazardous for transport. The indications are provided based on actual experience. Technical changes are possible.
Disposal: For information concerning waste disposal/effluent, please consult the corresponding safety data sheet.
Shelf life: Shelf life 5 years (from date of manufacture)
